laser cut sports trophy from acrylic

Acrylic sports trophy

You want to make a special sports trophy? In this tutorial we show you how you can make an impressive award out of individual acrylic layers.


Required material
  • TroGlass Duo 3mm Night and Day
  • TroGlass Satins 3mm Black
  • TroGlass Satins 3mm Lemon Green Translucent
  • TroGlass Satins 3mm White
Other materials
  • Acrylic 3mm Beige
  • 2 binding screws (shaft diameter: 5 mm, length: 40 mm)
  • 20 x washers (external diameter: 10 mm)
Trotec laser used for this application

Speedy 400flexx, 120 watts, 2” lens

Tip: Use an acrylic cutting grid table or acrylic slat cutting table

Glass Trophy


Download now


Download now

Step by step

Step 1

Step 1: Preparation

Choose which colors you want to use for the trophy. Ensure that there is a good contrast between the individual layers.


When ordering, ensure that the TroGlass Satins 3mm Lemon Green Translucent sheet already has double-sided adhesive film on one side.

laser settings for acrylic trophy
Step 2

Step 2: Laser Process​

Cut out the 15 elements from the acrylic sheets. For perfect results, we recommend using an acrylic cutting grid table. Cover the rest of the table and remove the protective film from the top side.

Laser Parameters

Scoring (red):
Performance: 5%, Speed: 1%, Frequency: 1000 Hz, Air Assist: ON, Z-Offset: 4mm
Cutting (blue):
Performance: 30%, Speed: 0.2%, Frequency: 5000 Hz, Air Assist: ON

The parameters can be downloaded directly in the download section and imported into your JobControl® material database.


Select these two options in JobControl® to get perfect cutting results.

  • Optimized geometries
  • Inner geometries first
acrylic trophy assembly
Step 3

Step 3: Assembly

Put all cut TroGlass elements in the correct order and have the binding screws and washers ready. Then attach the different parts and layers to each other by fastening the screws.
Here's a short video to show how it can be done.

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo