ironing film laser cutting

Heat transfer film
cut with a laser

Decorate your textiles with your favourite designs, logos and lettering "screen-printing like".


Required material
  • LaserFlex film, 
  • T-Shirt, 
  • heat press
Used Trotec Laser
Textile Heat Transfer Film


Download now
Textile Heat Transfer Film


Download now

Step by step

ironing film laser cutting
Step 1

Step 1: Engrave and Cut the LaserFlex

Create your own design or use our template. Send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Recommended parameters:

Engraving: Power: 50 %, Speed: 50 %, Resolution: 500 dpi, air assist on
Cutting: Power: 12 %, Speed 1 %, Frequency 1000 Hz, air assist on

Step 2

Step 2: Finish your textile application

Use a heat press for transferring the LaserFlex on textiles. Transfer the film for 17 seconds at 165°C / 329°F. Remove the liner when the material is completely cold. 

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo