Speedy series: CO2 laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
converts pdf and dxf files to files that can be processed by laser
Available for
Speedy Series
SP Series
The UniDrive Software is a program that converts files created in different formats to the "Trotec Spool File" format; this enables you to use Trotec JobControl® for engraving and cutting your jobs. Two different operating modes are available: In automatic mode, special directories are monitored. The files saved in these are converted automatically. In manual mode, you select one or more files, determine the settings, after which the converted files are saved in the Trotec spool directory.
The postscript formats from the prepress EPS and PS, the data exchange format PDF, and the image formats uncompressed BMP, JPEG, and uncompressed TIFF and the dxf file.