Impress your friends and colleagues with this individual paper finishing application. Precious paper laser engraved and cut.
Preparation
Required material
Paper or cardboard, we used "Gmund Doubleface 925 brown, silver"
Trotec laser used
Speedy 300
30 watts
1.5 inch lens
Step by Step
Laser finishing makes precious paper even more valuable.
Step 1:
Open the file "Bussines_Card" in your graphic programme, then send it to the laser. Please keep in mind that the settings for speed and laser power may vary depending on the machine used.
Laser Settings
Black (engraving): power: 30 %, speed: 25 %, frequency: 500 dpi, air assist: on
Red (cutting): power: 30 %, speed: 5 %, frequency: 1000 Hz, air assist: on, Z-Offset: -2
Blue (cutting): power: 25 %, speed: 1.5 %, frequency: 1000 Hz, air assist: on
Desert blue (cutting): power: 40 %, speed: 2 %, fequency: 1000 Hz, air assist: on
Business cards: laser engraved and laser cut.
Tips
Use the 1.5 inch lens. As a result, the detailed writings become particularly beautiful.
If you use conventional paper and not a special cardboard, our suggestion is to reduce the laser power.
The combination of the vacuum table and the honeycomb table leads to the best result.
Feel free to adapt the design! Be creative!
You can individualize the box with a saying or your motto.
