Stamp or photo? Have a close look and discover filigree details of the stamp imprint on any kind of paper.
- laser rubber
- stamp, we used Trodat Professional 5215
Trotec laser used
- Speedy 100
- 60 watts
- Use a 1.5 inch or a 2.0 inch lens.
If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images.
Open the file "Photo stamp" and send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.
Used engraving parameters (black):
Power 100 %, Speed 18 %, 600 ppi
Used cutting parameters (red):
Power 100 %, Speed 2,5 %, frequency 2000 Hz
As soon as the rubber sheet is engraved and cut, you can assemble the two parts.