The LED-illuminated interior for the Trotec laser workstations assists you with the correct component positioning and with laser focusing prior to the marking job. It can be switched off from outside of the machine.
The motorised lift door, available for the SpeedMarker 700 and SpeedMarker 1300 laser marking machines not only saves time during work preparation, it also ensures a high degree of operator safety. The integrated laser protection glass allows you to watch the laser marking process of your components as they are marked.
The large laser workstations can be used either as a sitting or standing workstation. This allows the operator to quickly load and unload components and moves freely without the need to stay at the laser system all the time.
Even if most of your parts are small and handy, you might have big and bulky parts from time to time. If this is the case in your business, just choose the pass-through option for your workstation. This makes the machine laser class 4 for that particular job, but offers you more flexibility.
The pass-through is available for the ProMarker 300 and the SpeedMarker 300.
The Galvo head can be moved using the software-controlled X-Y axes (in the case of the Y axis, the Y table moves) in order to be able to utilise the entire processing surface of large workstations. These movement paths can be controlled via the SpeedMark software (segmentation is also possible), whereby the entire processing area can be used in one step. With the SpeedMarker 1300, the software-controlled X-axis is already available in the standard configuration. With the SpeedMarker 1300 xl and SpeedMarker 1600, the software-controlled X- and Y-axes are already available in the standard configuration.
The software-controlled z-axis allows you to save time when setting the laser distance. The software-controlled height adjustment enables you to adjust your marking laser to different workpiece heights, meaing focusing will be successful for any application. The adjustment can be directly controlled in SpeedMark laser software.
You can also expand the SpeedMarker 700 and SpeedMarker 1300 laser markers with a software-controlled x- or y-axis.
SpeedMarker 700 laser system
The LWS 780 RT is a laser marking station with galvo rotary table and bulkhead. With this add-on, you can significantly reduce the cycle time during laser marking of series production parts. This will save you time when labeling components during the assembly of the laser system.
Optional: Design as standing workplace
The working height is increased by an additional base to approx. 950 mm which allows you to work in a standing position.
- Rotating angle of the galvo rotary table 180°, diameter 550 mm
- Galvo rotary table with rotating bulkhead
- Lateral door for service and for component labeling
- Position-controlled Z axis for focusing
- Control is integrated into the front
2. Pullout table:
A large pullout table serves as the Y axis, which is mobile across the entire width of the workstation. Working area: 1,000 x 375mm
3. Pullout double shuttle table
Two shuttle tables, each spanning over half the working area. These can either be controlled individually, creating a semi-automated laser marking process, or be moved simultaneously, which is ideal for laser marking large components. Work area: 2 x 500 x 375 mm