Customer Service
Phone: +44-191-580-1184
E-Mail: uk@troteclaser.com
Contact form 
New additions to the SpeedMarker laser marker series
Published on: 07/10/2018
Bigger. Wider. Heavier.
Expansion of the SpeedMarker Series
The portfolio of SpeedMarker laser workstations has expanded to include two larger machines offering even more possibilities for laser marking workpieces – especially very large or heavy workpieces. These larger laser marking systems can be equipped with a swivel mounted galvo head or a new, stronger rotary engraving attachment in order to enable laser marking of heavy cylinders, rings, pipes or other items with conical shapes.
SpeedMarker 1300 xl
The larger laser marking machine - SpeedMarker 1300 xl is of the same width as the SpeedMarker 1300, but has significantly increased depth and height. The laser markers offer an extra large working area of 1,000 × 500 mm and a max. workpiece height of 764 mm. The SpeedMarker 1300 xl is available in three different versions: The standard version is a large laser marking station, but the SpeedMarker 1300 xl can be additionally be configured with a protruding mobile table. This mobile table is available in two versions: As a mobile single table and as a change-over table version. This allows these heavy components to be positioned with a crane or other tools.
SpeedMarker 1600
The SpeedMarker 1600 laser marking machine is an even wider laser workstation than the 1300XL. The extra width results in a total working area of 1,300 × 450 mm. This wide workstation is ideally suited for the laser marking of very wide components such as pipes or profiles, or of large quantities of smaller components. This laser workstation is also being used at firing proof houses.
Discover the SpeedMarker Series of laser marking machines
Swivel mounted galvo head
This swivel mounted galvo head is well suited for horizontal or vertical laser marking applications. The accessory is controlled using SpeedMark laser software and enables variable positioning of the marking unit from 0 – 90°. This means that slanted workpieces can be just as easily marked as complex components. With the swivel head multiple sides of the component can be marked in a single work step.
Galvo rotary unit 2
The rotary engraving attachment 2 is ideally suited for the marking of large and heavy cylinders, rings, tubes and other conical shapes. The rotary unit 2 can be installed as an additional accessories into the larger SpeedMarker laser machines. The laser marking is carried through either segmentation or in individual steps. Optional add-ons, including a counter-bearing or different chucks, bring a new dimension in the laser marking of round or multi-sided components.
