Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
This page will show you different ways to define the correct laser parameters for your marking application. Find the correct parameters for marking metals, coated materials and plastics.
With a SpeedMarker laser system you can laser mark a variety of different materials, including all kinds of plastics which are different in their chemical composition making the laser react differently on impact. Therefore it is important to define the correct parameters to achieve the best results.
If you are laser marking different applications and new materials, the laser parameter finder is the ideal tool for you. By marking a parameter matrix on the material you can easily find the correct parameters. There are three variables: frequency, speed and power. Using the static matrix with one fixed variable (which can be defined by the user) the other variables are marked on a matrix.
For the most common materials there is a pre-defined and optimised laser parameter database. This database can easily be enhanced with individually defined parameters for your own applications and materials. The Material Database is easy to use and helps to reduce set-up times for regularly used materials.