Trotec laser machines allow you to laser engrave, cut and mark a number of different materials for various applications. These materials include but are not limited to wood, rubber, acrylic and textiles. The tables below are structured according to the type of processing (cutting, engraving, marking) and detail the types of materials suitable for each process.
|Metal foils up to 0.5mm |
(Aluminium, Brass, Copper, precious metal)
|Acrylonitrile butadiene styrene (ABS)||⚫||⚫||⚫|
|Acrylic/PMMA, i.e. Plexiglas®||⚫||⚫||⚫|
|Polybutylene terephthalate (PBT)||⚫||⚫||⚫|
|Polyethylene terephthalate (PET)||⚫||⚫||⚫|
|Polyoxymethylene (POM) -i.e. Delrin®||⚫||⚫||⚫|
|Polyphenylene sulfide (PPS)||⚫||⚫||⚫|
|Foam (PVC free)||⚫||⚫||⚫|
* This list is based on the processing capabilities of a Speedy flexx machine, which combines both CO2 and fiber laser sources in one machine.
For more details on what a CO2 or a fiber laser can cut, mark or engrave please read the below reference sheet.
Are you looking to process a material which isn't on the list? Request a free material test, where we will test your material to check it's suitability for laser cutting, engraving or marking.