See our lasers in action!
Laser engraver and cutter
Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
| ⚫ Engrave | ⚫ Cut | ⚫ Mark |
| Laser type: | CO₂, Flexx or Fiber laser |
|---|---|
| Work area: | 610 x 305 up to 1016 x 610 mm |
| Max. workpiece height: | 125 - 305 mm |
| Laser power: | 20 - 120 watts |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Engrave | ⚫ Cut | ⎯ Mark |
| Laser type: | CO₂ laser |
|---|---|
| Work area: | 1245 x 710 up to 2210 x 3210 mm |
| Max. workpiece height: | 50 - 112 mm |
| Laser power: | 40 - 400 watts |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Engrave | ⎯ Cut | ⚫ Mark |
| Laser type: | CO₂ or Fiber laser |
|---|---|
| Max. work area: | 190 x 190 up to 1300 x 450 mm |
| Max. workpiece height: | 250 - 764 mm |
| Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Laser engraved
photo stamp
Transform your photos into stamp imprints
Is it a stamp or photo? Have a close look and discover the filigree details of the stamp which will imprint on any kind of paper. In this tutorial you can create a stamp imprint by laser engraving stamp rubber. Laser rubber is available from our engraving supplies webshop.
Preparation
Materials required
- Laser rubber
- A stamp, we have used a Trodat Professional 5215
Trotec laser machine used
- 60 watt Speedy 100
Tip:
- Use a 1.5 inch or a 2.0 inch lens for laser engraving.
Step by Step
Step 1: Choose your photo
Where possible, use a high-contrast portrait photo with a light, even background. When using pictures from Internet, always download large-scale images.
Read our detailed guide on how to prepare a photo for stamp engraving.
Step 2: Laser engraving and cutting the laser rubber
Open the file "Photo stamp" and send it to the laser using the recommended laser parameters for the material. Parameters vary depending on your laser machine and its available laser power.
Used laser engraving parameters (black):
Power 100 %, Speed 18 %, 600 ppi
Used laser cutting parameters (red):
Power 100 %, Speed 2.5 %, frequency 2000 Hz
Step 3: Assembly
Once you have finished laser cutting and engraving the rubber, you are ready to fix it into the stamp.
