Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Follow our tutorials to create protective face masks to combat the spread of COVID-19
Since safe respirators and surgical masks are often in short supply, we have compiled a variety of files for Covid-19 protective elements for you on this page:
Important: These parts do not offer one hundred percent protection against infections, but they can serve as an alternative. Please note that these parts are not certified.
Using a single sheet of PET .007" we created these face shields with a modified design we got from ThingiVerse to help laser users around the world create these face shields!
Further information (in English): www.lasersystemseurope.com
Many of our customers are using their laser machines to create ways to fight the spread of COVID-19, and we are inspired by the solutions which they are creating. Due to the shortages in medical supplies, workers on the front lines need to be as protected as possible.
This video tutorial will show you how to create a protective face mask using your laser machine and a sewing machine.
From a 40 x 20 cm piece of fabric (size S) and 2 rubber bands of 30 cm each you can quickly and easily make a simple makeshift mouth-and-nose protector (= BMNS). For size M you need a piece of 40 x 30 cm, for sizes L 50 x 40 cm.
In this tutorial you can find instructions for creating various different signage using Trotec materials. By laser cutting and engraving our engravable acrylic, laser engraving laminates and foils you can create simple and effective signage to convey a message.
Here you can find the files for acrylic door openers for non-commercial use. Together we can prevent the spread of the corona virus in our communities.
Directions on how to create this adjustable ear guard to use with your PPE face mask