Fespa 2018

Trotec presents an automated large format laser cutter solution for soft signage applications

Published on: 04/26/2018 Author: Petra Berger

Wels, April, 2018. Trotec presents large format laser cutter solutions of the award winning SP series to the specialist audience at this year's Fespa in Berlin in hall 1.1 at stand B28 from May 15 to 18, 2018.

This year's highlight: SP4000C for soft signage applications

This year's highlight is the  fully automated laser system SP4000C for soft signage applications such as banners, flags, or light boxes with a maximum roll width of 3,210 mm. The laser beam melts the material while cutting and this results in clean, perfectly sealed edges and no fraying. Another advantage: thanks to the contactless and tool-free process, even elastic material can be cut distortion-free and reliably. By combining an automated solution with high cutting speeds and convincing accuracy, high production volumes with perfect quality are achieved. The large format laser can be flexibly configured around a conveyor belt with feeder unit and unloading table – depending on the desired workflow. All components are perfectly matched.

More about SP4000 laser cutter

SP Series: Large Format Laser Cutting & excellent design

The laser machines of the SP series are highly efficient and ideally suited for demanding cutting applications, for example for laser cutting acrylics, wood or cardboard. Due to the distinct and open design of the V-shaped body, the SP2000 with a working area of 1.68 m by 2.51 m is easy to access from all four sides and allows economical loading and unloading even during processing. The larger equivalent SP3000 with a working area of 2.2 x 3.2m was already honored with two of the most renowned design prizes: the iF Design Award and the German Design Award.

Read more about the SP Series

Speedy flexx: CO2 and fiber laser in one laser machine

Furthermore, Trotec presents the popular flexx laser machines for maximum flexibility. The flat bed lasers of the flexx series are equipped with a CO2 and a fiber laser. The two laser sources can be activated without manual change of the laser source, lens or focus. Virtually anything can be marked and engraved using this laser device: from plastics or wood to glass or metal, even workpieces with mixed materials.

Explore Speedy flexx laser machines

Visit Trotec at Fespa in hall 1.1 at stand B28

Interested in a live demo of our laser cutters? Or looking for more information about our laser machines? We invite you to see our lasers in action at our stand. Please contact us for further information.

Get your free voucher