Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
The right working table for every application
This cutting table, made with aluminum slats, is predominantely used for cutting thick (up to 1'') and materials wide than 4''. Acrylics can be cut with no reflections by switching out the aluminum slats for the acrylic slats. One can reduce the number of supporting points by removing slats individually, depending on the job.
This robust, universal cutting table is characterized by extremely stable combs and a long lifetime. It works extremly well for cutting tasks with parts smaller than 4'', since the small pieces do not fall through the table and in a flat position after the cut. Compared to the slat cutting table the aluminum cutting grid table has more supporting points.
The universal cutting table is ideal for the reflection-free cutting of thin acrylics with a thickness up to 1/3''. Like with the aluminum cutting grid table parts smaller than 4'' remain in a flat position after the cut.