Speedy series: laser engraving and cutting machines for workpieces up to 40 x 24 inches
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 24.0 x 12.0 up to 40.0 x 24.0 inch |
Max. workpiece height: | 4.9 - 12.0 inch |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 49.0 x 28.0 up to 128.0 x 126.4 inch |
Max. workpiece height: | 2.0 - 4.4 inch |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 7.5 x 7.5 up to 51.2 x 17.7 inch |
Max. workpiece height: | 9.8 - 30.1 inch |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
With a few tips and tricks, you can create the optimum conditions for your Trotec laser system – whether in sweltering summer heat or in a fresh winter breeze.
The following conditions are ideal for Trotec laser machines:
You should also protect the device from direct sunlight.
In winter, overnight temperatures may happen to drop below the recommended conditions. This can lead to condensation in the laser tube and thus to damage. In addition, greases and oils can harden, affecting the mechanical parts.
But you can avoid these problems!
Install a frost guard on the heater to keep the room temperature from falling below the optimal +15 °C (59 °F). You can also warm up the room slowly before using the laser.
Do not place the laser too close to the heat source, since the warm air could be drawn in as cooling air, causing the laser to shut down due to overheating.
Wrap it overnight into an insulating hood in order to maintain the temperature. If the coolant is at a temperature below +15 °C (59 °F), the machine cannot be switched on, for safety reasons.
In summer, laser machines are exposed to the heat of the sun and to the cold from air conditioning systems. Either can lead to problems. High ambient temperature, in particular, can adversely affect functionality.
But with our tips all this should be no problem! Use the following tips to avoid these problems.
Need more help?
Contact the Trotec service hotline where top qualified and motivated laser experts will assist you with any questions or problems.
back to overview