With Trotec laser cutting and engraving machines, you can cut, engrave or mark a wide range of materials. These include: plastic, wood, rubber, leather, metal, textile and many others. In the table below, you can see details about the material processing capabilities of our laser engraving and laser cutting machines. The list of materials is structured according to processing type (cutting, engraving, marking).
|Metal foils up to 0.02" |
(Aluminum, Brass, Copper, precious metal)
|Acrylic/PMMA, i.e. Plexiglas®||⚫||⚫||⚫|
|Polybutylene terephthalate (PBT)||⚫||⚫||⚫|
|Polyethylene terephthalate (PET)||⚫||⚫||⚫|
|Polyoxymethylene (POM) -i.e. Delrin®||⚫||⚫||⚫|
|Polyphenylene sulfide (PPS)||⚫||⚫||⚫|
|Foam (PVC free)||⚫||⚫||⚫|
* List of materials is based on a Trotec flexx laser. Flexx laser machines combine a CO2 and a fiber laser source in one machine.
For more details on the cutting, marking and engraving capabilities of our CO2 lasers or fiber lasers, please refer to the sheet below.
Are you looking for information on a material that was not on the list? Please contact us and we will be more than happy to check if your material is suitable for laser cutting or laser engraving.