Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
for the production of embossing presses
Delrin is used for the production of embossing presses. Embossing presses are used by notaries, companies, engineers and government agencies to add relief embossings, in addition to a signature, in order to protect quality documents from being copied fraudulently. Furthermore, an elegant embossing adds a personal touch to stationery and invitations. Whether it is a logo, home address or something creative, there is no limit to the number of possible applications.
Delrin is a trade name for the material group polyacetal (POM). This material is highly suitable for laser cutting or engraving because it can easily be removed by the laser beam.
A good fit between the two forms is important. It is also necessary to ensure that the engraving has the correct depth. The engraving depth should be at least 0.25 mm, but a maximum depth of 0.50 mm must not be exceeded. If the engraving is too shallow, the embossing is barely visible. If the engraving is too deep, the paper may tear. Once determined, the parameters are stored in the materials database of the JobControl® software and can be retrieved at any time.
Text or graphic elements should be at least 0.5 mm or no smaller than a five-point font in size. When using significantly heavier paper grades of 80 g/m², the size of the graphic elements should also be increased.
The problem with seal presses can be that Delrin often has too sharp edges, and the punch thus cuts through the paper. Our tip: Set the laser to be out of focus by around 2 mm (= Z-axis offset by 2 mm) – embossing results remain the same, but the edges become more rounded, and the process is therefore gentler to the paper.
Delrin is used in the production of embossing presses. Embossing presses use a positive and a negative relief to emboss paper. The positive relief (male) is created with white letters on a black background and the negative relief (female) is inverted and mirrored.
The laser beam is a universal tool for material processing, so there is no need for tool or grinding costs for milling cutters or drills. During processes such as mechanical engraving, materials must often be clamped in place or fixed with a vacuum. This is not necessary in laser processing, which saves time and money.