Laser engraved photo frame
In this tutorial you will learn how to laser engrave an individual design on a wooden photo frame.
Preparation
Required material
- 1 photo frame, solid wood
Machine used
- Speedy 360, 120 watts
- 2" lens
- vacuum table
Tip
Further personalize your design to suit your customer's needs.
Step by step
Step 1: Import design
You can use our graphic as a template to create your own individual design for the photo frame out of solid wood. Send the job to the laser using the driver settings below:
Process mode | Resolution | Cut line |
---|---|---|
Standard | 500 dpi | none |
Halftone | Others |
---|---|
Color | - |

Step 2: Laser engraving the photo frame
Lay the photo frame on the bed of your Trotec laser machine. Make sure the areas to be engraved are flat because you will be engraving both the wooden frame and glass in one pass (note you will also need to position a distance holder due to the leg on the back of the frame). Focus on the glass.
As we engrave materials with height differences you must calculate the z-Offset. In our case we put an offset value of +7 mm as the height difference between the two materials is 7 mm. Please note the parameters can vary depending the machine you are using and available laser power.
Laser Parameters | Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|---|
Dark engraving (wood) | Black | Engrave CO2 | 35 | 50 | 500 |
Light engraving (wood) | Red | Engrave CO2 | 10 | 50 | 500 |
Engraving (glass) | Blue | Engrave CO2 | 40 | 50 | 500 |
Laser Parameters | Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|---|
Dark engraving (wood) | 1 | On | +7 mm | High Quality |
Light engraving (wood) | 1 | On | +7 mm | High Quality |
Engraving (glass) | 1 | On | - | - |
Tip:
You can use leftovers of acrylic or MDF for the distance holders. Cut them in circles or cross-shapes.

Step 3: Cleaning
Clean the photo frames with a damp cloth and remove dust residue. Your photo frame is ready for display.
Preparation
You Will Need
- 1x Wooden photo frame
Machine Used
- Speedy 360
- 120W
- 2" lens
- Vacuum table
Tip
Add a name, date or logo to further customise your work and meet your client's needs.
Step by step
Step 1: Import the Design
You are free to use our graphic as a template to create your own design. Or, try getting creative and making something from scratch! Once you have your design, send the job to the laser machine using the following driver settings:
Process Mode | Resolution | Cut Line |
---|---|---|
Standard | 500dpi | None |
Halftone | Others |
---|---|
Colour | - |

Step 2: Laser Engraving the Frame
Place the photo frame into your laser machine. Ensure the areas you are going to engrave are flat - this is so that you can easily engrave the wood and the glass in one single pass. Please note that you will need to use a positioning mount because of the back leg of the frame. When you have completed positioning the frame perfectly, focus on the glass.
As we engrave materials with height differences you must calculate the z-Offset. In our case we set the offset value at 7mm, as the height difference between the two materials is 7mm. Remember, the parameters may vary depending on what machine you are using and its available laser power.
Laser Parameters | Colour | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|---|
Dark Engraving (Wood) | Black | Engrave CO2 | 35 | 50 | 500 |
Light Engraving (Wood) | Red | Engrave CO2 | 10 | 50 | 500 |
Engraving (Glass) | Blue | Engrave CO2 | 40 | 50 | 500 |
Laser Parameters | Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|---|
Dark Engraving (Wood) | 1 | ON | +7mm | High Quality |
Light Engraving (Wood) | 1 | ON | +7mm | High Quality |
Engraving (Glass) | 1 | ON | - | - |
Tip:
Try using leftover acrylic or MDF as your distance holders. Just cut them into small circles or crosses.

Step 3: Cleaning
Clean the photo frame with a damp cloth and remove all the dust residues. Now, your frame is ready for use!
Inspiration
You can always try creating a collection of different frames for something like a wedding. You can include the menu, a seating plan or simply use one as a wedding gift. The sky is your only limit!