Advent wreath made of acrylic and MDF
Preparation
Required material
- 3 half sheets (606 x 606 mm) of TroGlass or acrylic of any color and thickness
(available at trotec) - 1 sheet (1220 x 600 mm) of MDF of any thickness (available at trotec)
- Acrylic and superglue
- Candles and decoration
Machine used
- Speedy 400 flexx
- 80 Watt with 2" lens
You can use any machine from our SP series for this sample. If you want to use a Speedy 360 or Speedy 300, please adapt the cutting files accordingly. The sheets should have a height of minimum 345 mm.
Important
- To cut the MDF, please use the aluminum cutting grid table
- For cutting the acrylic, we recommend using the acyclic grid cutting table to prevent reflections of the laser beam on the back of the material
Step by step

Step 1
Step 1: Import /create design template
First, import our design template into your graphic program or make your own design. We created a design that allows you to produce two advent wreaths in one cutting step. This not only saves time, but also material. Send your design to the laser using the recommended settings.
Important:
Please cut all 5 files out of the acrylic. (They differ by the position of the circles for assembly.) This ensures that the single elements do not sit exactly above the other, but they are slightly turned. Page 6 of the file is for the MDF.Print settings
process mode | resolution | cut line |
---|---|---|
Standard | 500 dpi | none |
halftone | others |
---|---|
color | enhanced geometries inner geometries first |

Step 2
Step 2: Laser process
Position the MDF into the laser and cut it out. Then put the first acrylic sheet into your laser and cover the rest of the table to maximize the exhaust power. Remove the protective foil after the laser process.
Laser Parameters Acrylic 3 mm
colour | process | power (%) | speed (%) | ppi/HZ |
---|---|---|---|---|
red | cutting CO2 | 100 | 0.9 | 1000 |
passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | 0 | - |
Laser Parameters MDF
colour | process | power (%) | speed (%) | ppi/HZ |
---|---|---|---|---|
red | cutting CO2 | 100 | 0.5 | 1000 |
passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | 0 | - |
Info:
- We used the standard laser parameters from JobControl®, which are optimized for quality
- To download material parameters used in JobControl®, go to www.troteclaser.com
Preparation
Required material
- 3 half sheets (606 x 606 mm) of TroGlass or acrylic of any colour and thickness
- 1 sheet (1220 x 600 mm) of MDF of any thickness
- Superglue
- Candles and decoration
Machine used
- Speedy 400 flexx
- 80 Watt with 2" lens
You can use any machine from our SP Series for this sample. If you want to use a Speedy 360 or Speedy 300, please adapt the cutting files accordingly. The sheets should have a height of minimum 345 mm.
Important
- To cut the MDF, please use the aluminium cutting grid table.
- To cut the acrylic, we recommend using the acyclic grid cutting table to prevent reflections from the laser beam
Step by step

Step 1
Step 1: Import /create design template
Firstly, you need to import our design template into your chosen graphics program. Alternatively, you can create your own design. The design we created allows you to produce two advent wreaths in one cutting step.

Step 2
Step 2: Laser process
Place the MDF into the laser and cut out the template. Once finished, put the first acrylic sheet into your laser and ensure that the rest of the table is covered. This will maximise the exhaust power. Remove the protection foil once the laser process is complete.