--------------------------
acrylic-wooden-trophy

Anniversary trophy combining different Trotec materials

acrylic-wooden-trophy

Anniversary trophy combining different Trotec materials

Want to create a unique and eye-catching trophy that can easily be tailored to your customer's needs? Then this is the perfect tutorial for you. This trophy is sure to impress your customers and add a tremendous amount of value to your work. All engraving and cutting materials are available from the Trotec webshop.

Preparation

You Will Need
  • 1x sheet of Solid Wood Walnut 600x300mm
  • 1/4 sheet TroGlass Metallic - Bright Silver
  • 1/4 sheet TroGlass Clear 5mm 
  • 1/4 sheet clear acrylic 20mm
  • 1x pack of signage wall mounts - S15-15-FK
  • 1x aluminium tag - silver with a ball chain
  • Glue dots / double-sided adhesive tape / acrylic glue
Machine used

This trophy can be produced using anything from the Speedy or SP series of laser machines.

Important
  • Seeing as glue is not actually needed to hold the pieces together, remember to pay close attention to the kerf. If necessary, you may need to cut a small geometry and measure the dimension. Only then will you be free to adapt the kerf accordingly.
  • Remember that the laser parameters outlined here may change depending on the machine you are using and its available laser power.
Anniversary Trophy

ZIP

Download now

Step by step

laser-cutting-wood-trophy
Step 1

Material 1: Wood

Import the design we have provided into your chosen graphics program and adapt it to suit your requirements. We decided to use seven pillars for this trophy, but you can always use more or less.

1. Print Settings:

To begin cutting the wood, send the job to the laser machine using the following settings:

Process Mode Resolution Cut Line
Standard 500dpi -
Halftone Others
Colour Optimised Geometries, Inner Geometries First

2. Laser Process & Parameters - Wood

Place the wood into the laser machine and activate the vacuum to help with unevenness.

Colour Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 100 0.8 1000
Passes Air Assist Z-Offset Advanced
1 ON - -

Info:

We decided to use the standard laser parameters for Solid Wood - Walnut

laser-cutting-acrylic-20mm
Step 2

Material 2: Acrylic 20 mm

Next, you'll need to create the base and the upper connectors. We chose to use 20mm acrylic, but you can use thinner materials if you'd prefer. Ensure that you measure the thickness of the wooden parts before you begin cutting the acrylic pieces. Adapt the notches if necessary.

1. Print Settings:

Send the job to your laser machine using following settings:

Process Mode Resolution Cut Line
Standard 500dpi -
Halftone Others
Colour Optimised Geometries, Inner Geometries First

2. Laser Process & Parameters - Acrylic (20mm)

We used the SP1500 (400W) to cut our acrylic. We suggest also using the 5" lens and focus 4mm into the material. The slot in the upper connector will be used to insert the ball chain, so adapt the engraving depth if necessary.

Colour Process  Power (%) Spped (%) ppi/Hz
Red Cut CO2 35 0.2 2000
Passes Air Assist Z-Offset Advanced
1 ON 4mm -

Tip:

If you've replaced the 20mm acrylic with something that is only 10mm, you can cut it with your Speedy machine instead. Use the standard parameters in JobControl optimised for quality, and make sure you use a 2.5" lens instead.

Info:

Use the standard laser parameters for TroGlass Clear - 20mm when cutting the pieces.

laser-process-troglass-metallic
Step 3

Material 3: TroGlass Metallic

The middle part of the trophy can be made using any other TroGlass colour that you'd like. You can even add things like graphics and logos.

1. Print Settings:

Send the file to your laser machine using following settings:

Process Mode Resolution Cut Line
Standard 500dpi -
Halftone Others
Colour Optimised Geometries, Inner Geometries First

 2. Laser Process & Parameters - TroGlass Metallic

Depending on how you'd like to stick the TroGlass Metallic to the 20mm base, you may need some double-sided adhesive foil before the cutting process begins.

Colour Process  Power (%) Speed (%) ppi/Hz
Red Cut CO2 40 0.2 5000
Passes Air Assist Z-Offset Advanced
1 ON - -

Info:

We used the standard laser parameters for TroGlass, optimised for quality.

laser-cutting-acrylic-5mm
Step 4

Material 4: Acrylic 5 mm

Measure the thickness of your chosen wood and adapt the kerf if necessary.

1. Print Settings:

Send the job to your laser machine using the following settings.

Process Mode Resolution Cut line
Standard 500dpi -
Halftone Others
Colour Optimised Geometries, Inner Geometries First

2. Laser Process & Parameters - Acrylic 5mm

Place the material onto the acrylic cutting grid table.

Colour Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 85 0.2 20000
Passes Air Assist Z-Offset Advanced
1 ON -1.5mm -

Info:

We decided to use the standard parameters for TroGlass Clear 5mm, optimised for quality.

Step 5

Material 5: Aluminum tag

The aluminium tag is the perfect spot to engrave someone's name, logo or graphic. You are free to use different colours and shapes for this part of the project to add an interesting extra detail. 

1. Print Settings:

Send the job to your laser machine using the following settings

Process Mode Resolution Cut line
Standard 500dpi -
Halftone Others
Colour -

2. Laser Process & Parameters - Aluminium Tag

Place the aluminium tag onto the laser bed. By using the 1.5" lens, you'll be able to show the finer details. Remember though, our laser parameters may differ depending on which machine you are using and its available laser power. For example, we used the SpeedMarker MOPA laser for the black markings.

Tip:

To achieve the exact positioning of the graphic on the work piece, you can use a template or a positioning aid in the JobControl® software.

Colour Process  Power (%) Speed (%) ppi/Hz
Black Engrave CO2 10 20 500
Passes Air Assist Z-Offset Advanced
1 ON - High Quality
Step 6

Assembly

When it's time to assemble the trophy, begin with the wooden beams. Place them inside the upper connector. Before you attach all of them, thread the ball chain through the aluminium tag, and hang the lock in its little designated slot. Then, place the lower end of the wooden pieces into the 5mm acrylic. Mount the signage by sticking the parts all together with glue dots, naturally following the creases in the TroGlass Metallic. Tighten all the screws and, finally, glue the TroGlass Metallic piece onto the thick acrylic base.

As a special design element, we decided to add a little acrylic globe to the top of one of our trophies. You can learn how to create it below.

DIY Acrylic Globe with Moving Parts

Inspirations

Please keep in mind that this is a project for very advanced laser users. It requires a lot of detail, lots of different materials and the ability to mark anodised aluminium. However, if you have all the appropriate equipment, this is a great trophy that can be pre-made and adapted later to suit customer requirements. Happy crafting!

Speedy series
The ideal laser engraver and cutter for personalisation.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo