Laserati DT

The best laser machine for rubber stamp engraving

laser engraver for stamp production

Specially Developed For Rubber Stamp Engraving

The Trotec Laserati is a particularly powerful CO2 laser engraving machine that was specially developed for rubber stamp engraving. During the engraving process, up to 4 DIN A4 laser ruber plates are tightly clamped on a roller and held in place by a strong vacuum. Thanks to the design, the laser will then engrave an A4 laser rubber page in about 20 minutes (engraving depth 1.1mm). The drum works with hardly any wear-&-tear while delivering an excellent engraving quality.

The Trotec Benefit

  • Minimal ongoing maintenance
  • low production times
  • high production volumes and maximum quality...

...all at the exact same time, only with the Laserati DT! Trotec's specifically designed machine is the best solution out there for stamp production. You can’t go wrong with Trotec!

Technical Data

Dimensions 1420 x 850 x 1420 mm / 56" x 34" x 56"
Working area: 840 x 300 mm / 33,1" x 11,7"
Mechanical design: fully closed housing with duplicate safety system,
laser safety class 2,
drives with brushless servo motors (maintenance free)
Construction: Robust unit (105 W – approx. 300 kg),
drum with vacuum function,
laser pointer (standard)
Laser type: Sealed-off CO2 laser
Available laser power: 105-220 Watt
Electrical connection: single phase 230V/ 50-60 Hz



See our lasers in action! Request a demo now
Request a demo now