Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
All your laser cutting, and engraving processes are displayed in different colours in JobControl®. A processing time is, in turn, calculated for each process. The calculation is based on the laser parameters entered for 'Speed' and 'Passes', If you change these parameters in the material database, the processing time also needs to be recalculated so that it's displayed correctly.
All you need to do is double-click the processing plate to access the material database. Then, enter the updated laser parameters within the appropriate fields.
The processing time will now recalculate.
Need more help?
You can always contact the Trotec service hotline where top qualified and motivated laser experts can assist you with any questions or problems you may be having.