Black marking on anodised aluminium

Learn how to create black markings on anodised aluminium using a MOPA laser.

Zwarte lasermarkering op geanodiseerd aluminium — Black laser marking on anodized aluminum

Produce high-quality dark markings on anodised aluminium

Anodised aluminium can be engraved efficiently and precisely with a laser machine. A white marking is produced when the anodised layer is removed. While this method is perfectly suited for coloured anodised coatings, for natural anodised aluminium, this marking is not clearly visible. Black marking is therefore recommended as it achieves significantly higher quality. Natural anodised aluminium can be finely laser marked in various gray tones, as well as a rich black, with a MOPA laser. This process is ideal for a range of applications, including marking high-quality smartphones.

Desired result achieved with short pulse durations

The secret to black marking anodised aluminium is that you can set extremely short pulse durations with the MOPA laser. The short pulse durations do not damage the surface of the material and the anodised layer is not removed, rather it is just repainted. While the process is entirely different from the production of tempering colours on stainless steel, the result nonetheless is comparable. You can set the filling line distance to adjust in various shades of grey as well as black. Note the smaller the distance, the darker the markings.

Met de MOPA laser zwarte markeringen op geanodiseerd aluminium aanbrengen — With the MOPA laser you can mark anodized aluminum black.

Met de MOPA laser markeringen van diverse grijstinten tot zwart aanbrengen — With the MOPA laser you can mark various shades of gray up to black.

Setting the correct parameters:

You need a 20 watt MOPA laser to black mark anodised aluminium. We recommend using the F-254 lens because it perfectly fits the spot diameter for this application. We recommend setting the following parameters:

Power	Speed	Frequency	Pulse duration
50%	1500 mm/s	200 kHz	8 ns

Focus	Filling lines distance	Passes
In focus	0.001 mm bidirectional for a rich black 0.002 - 0.005 mm bidirectional for gray tones	1

Please consider the following:

We would like to point out that the anodised layers can be very different. For this reason, always use the engraving page for the black marking. Our laser experts would be happy to assist you should you have any further questionss.

To ensure that the parameters we specify work, we suggest you purchase anodised aluminum from our product range.

Trotec materials webshop