Wall decoration: Letters

This wall decoration, made using our high-quality TroGlass material, is set to brighten and add character to any room or space!


Preparation

Material used:

  • 3 pieces TroGlass in different colours
  • Distance holders R15-15-FL

Machine used:

  • Speedy 400
  • 120 watts
  • 2" lens
  • Vacuum table with acrylic cutting grid table

You can use any machine from our Speedy laser engraver series for this application.


Step by Step

Step 1: Import the graphic file

Import our template and tailor it to suit your needs. Once the design is finalised, send it to the laser machine using the following settings.

Print Settings:

Process mode Resolution Cut line
Standard 500dpi none
Halftone Others
Colour Optimised Geometries, inner geometries first

Steps 2: Laser process

Please note that the laser parameters may vary depending on the type of laser machine you are using and the available laser power.

Laser parameters:

Colour Process Power (%) Speed (%) ppi/Hz
Red Cut CO2 100 1.2 5000
Passes Air Assist Z-Offset Direction Advanced
1 ON - - -

 

 


Step 3: Assembly

Using the back plate, mark the drill holes in your wall. Fix the plate to the wall with the distance holders. The proceed to adding the coloured acrylic letters to the distance holders, ensuring that you secure them with an Allen key. Your masterpiece is now complete!


The fantastic thing about this application is that it can be created using different materials and fonts. Let your imagination run wild and have fun experimenting with different designs and sizes!


Check out the Speedy laser engravers

See our lasers in action! Request a demo now
Request a demo now