Stand out from the crowd with unique business cards by using this individual paper finishing application. By having precious paper engraved and cut with your design, business colleagues will be sure to be impressed.
Paper or cardboard, we used "Gmund Doubleface 925 brown, silver"
Trotec laser used
- Speedy 300
- 30 watts
- 1.5 inch lens
Open the file "Bussines_Card" in your graphic programme, then send it to the laser. Please keep in mind that the settings for speed and laser power may vary depending on the machine being used.
power: 30 %, speed: 25 %, frequency: 500 dpi, air assist: on
power: 30 %, speed: 5 %, frequency: 1000 Hz, air assist: on, Z-Offset: -2
power: 25 %, speed: 1.5 %, frequency: 1000 Hz, air assist: on
Desert blue (cutting):
power: 40 %, speed: 2 %, fequency: 1000 Hz, air assist: on
- Use the 1.5 inch lens. As a result, the detailed writings become particularly beautiful.
- If you use conventional paper and not a special cardboard, our suggestion is to reduce the laser power.
- The combination of the vacuum table and the honeycomb table leads to the best result.
- Feel free to adapt the design! Be creative!