TroGlass Neon has a particularly bright colourful appearance when you use white acrylic glass as a backing - as has been done with this sign. TroGlass Neon is available in four different colours. Use your favourite combinations and variations of colour to make your creativity stand out!
Preparation
Material required for the sign, outer diameter approx. 29cm:
TroGlass Neon Pink, 3mm - self-adhesive: 606 x 301 mm (1/4 sheet)
TroGlass Neon Green, 3mm - self-adhesive: 606 x 301 mm (1/4 sheet)
TroGlass Satins white, 3mm: 606 x 301 mm (1/4 sheet)
This sign can also be produced using a different machine from the Speedy laser engraver series. Adjust the parameter settings to suit your particular machine.
Create your own design or use our template. Now send the job to the laser using the settings below.
Print settings
Process mode
Resolution
Cut line
Standard
500dpi
none
Halftone
Others
Colour
Optimised geometries, inner geometries first, minimise to job size
Step 2: Laser process
Now create the material parameter settings. All three TroGlass panels can be cut with the same settings. The suggested material parameters may vary depending on which laser machine you are using and how much laser power you have available.
The blue cutting lines on the white base plate serve only to indicate the correct positioning when adhering the neon-coloured elements and should be placed in front of the red cutting parameters if possible. This will produce the best possible cutting result.
Leave the protective film on the material and place the first TroGlass plate in the laser machine. Close the lid of the laser and start the appropriate cutting process. Then cut the other two plates as well.
Laser parameters - TroGlass 3mm:
Color
Process
Power (%)
Speed (%)
ppi/Hz
Blue
Cut CO2
10
1
1000
Red
Cut CO2
500
0.2
5000
Passes
Air Assist
Z-Offset
Direction
Advanced
1
ON
3
-
-
1
ON
-
-
-
Step 3: Assembly
After the laser process, remove all of the cut parts from the laser machine.
Now you can remove the protective film from the top of all the cut parts.
Finally, you can now remove the protective film from the back of the coloured elements and attach the individual parts one after the other. The marking lines on the white base plate indicate their position and orientation.
Why should I use TroGlass Neon?
TroGlass Neon catches the eye with its bright colours: pink, yellow, orange and green. These four refreshing neon colours boldly stand out, drawing attention to themselves, becoming the highlight of every product.
TroGlass Neon combines the advantages of opalescence and striking fluorescence in one product. However, it is not only the appearance of TroGlass neon that makes this product so attractive, it also has excellent resistance properties to outdoor weathering, making it the perfect choice for a bold all-weather product.
Bring your products to life with this outstanding cast acrylic glass:
In the download file you will also find a template for a much larger sign with an outer diameter of about 590mm. This enables you to make the sign in two different sizes. Don't forget you can vary the colours according to your personal choice!
TroGlass Neon stands out exceptionally well against a dark background - making the sign a distinctive and bold eye-catcher!
