See our lasers in action!
Laser engraver and cutter
Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
| ⚫ Engrave | ⚫ Cut | ⚫ Mark |
| Laser type: | CO₂, Flexx or Fiber laser |
|---|---|
| Work area: | 610 x 305 up to 1016 x 610 mm |
| Max. workpiece height: | 125 - 305 mm |
| Laser power: | 20 - 120 watts |
Large-format laser cutter
SP series: CO2 laser cutter for large-format materials.
| ⚫ Engrave | ⚫ Cut | ⎯ Mark |
| Laser type: | CO₂ laser |
|---|---|
| Work area: | 1245 x 710 up to 2210 x 3210 mm |
| Max. workpiece height: | 50 - 112 mm |
| Laser power: | 40 - 400 watts |
Industrial marking laser
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
| ⚫ Engrave | ⎯ Cut | ⚫ Mark |
| Laser type: | CO₂ or Fiber laser |
|---|---|
| Max. work area: | 190 x 190 up to 1300 x 450 mm |
| Max. workpiece height: | 250 - 764 mm |
| Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Laser Cut Silhouette
Learn how to make amazing laser cut paper silhouettes. Laser cut paper artwork can make a special gift, and is perfect for special event and holiday decorations.
Preparation
Required Material:
- 1 Sheet LaserPaper Orange-Red
- 1 Sheet LaserPaper Slate Gray + self adhesive
- 1 Sheet LaserPaper Blue + self adhesive
- 1 Sheet LaserPaper Dark Blue + self adhesive
- 1 Sheet LaserPaper Black + self adhesive
- Covering material
Machines Used:
- Speedy 360, 80 Watt
- 1.5" lens
- Honeycomb vacuum table
We used the Speedy 360 laser, but you can laser cut this paper silhouette using any Trotec Speedy series laser cutter.
Tip:
Use a 1.5" lens to achieve the best results when laser cutting intricate paper designs.
Step by Step
Step 1: Design
Import the graphics template and edit the design to create your own individual silhouette. Once you're happy with the final design, use the following settings when sending the job to JobControl:
| Process mode | Resolution | Cut line |
|---|---|---|
| Standard | 500dpi | none |
| Halftone | Others |
|---|---|
| color | Enhanced geometries, Inner Geometries first |
Step 2: Laser Process the Paper
Arrange the laser paper sheets in order according to your design. Place each sheet individually in your Trotec laser. To create a strong vacuum, cover the remaining working area of the table. Adjust the laser parameters (power and speed) to suit the model and laser power of your Trotec laser.
Laser Parameters: Engraving
| Black | Engrave CO2 | 40 | 70 | 500 |
|---|---|---|---|---|
| Color | Process | Power % | Speed % | ppi/Hz |
| 1 | ON | 0mm | High Quality |
|---|---|---|---|
| Passes | Air Assist | Z-offset | Advanced |
Laser Parameters: Cutting
| Color | Process | Power % | Speed % | ppi/Hz |
|---|---|---|---|---|
| Red | Cut CO2 | 15 | 1 | 1,000 |
| Passes | Air Assist | Z-offset | Advanced |
|---|---|---|---|
| 1 | ON | 0mm | - |
Step 3: Assembly
To arrange your design, place down the backing sheet and stack the colored sheets on top, in the order in which they appear in your design. If you have chosen to use our template, use the orange rectangle for the backing sheet, and then stack the remaining colors on top in the following order:
- Slate grey
- Blue
- Dark blue
- Black as finishing
Trotec Materials
We used Trotec LaserPaper to test the parameters for this laser cut silhouette project. Trotec LaserPaper has been designed specifically for laser processing, like all of our range of materials. Choosing LaserPaper will ensure you get the highest contrast engraving results and the cleanest laser cuts. Trotec LaserPaper is available in a wide range of colours, and the high quality makes it the perfect choice for applications including invitations, brochures, business cards, greeting cards and more.
Inspiration
- Add additional depth and dimension by using laser cut spacers made with TroLase ADA, simply stick them between the individual sheets.
- Replace the orange base plate with white LaserPaper Synthetic, so the picture can be back lit by a light for extra effect.
- The right laser cut silhouette design makes a great gift card.