stamp photo quality

Laser engraved
photo stamp

Transform your photos into impressive stamp imprints.

Use your Trotec laser to make a detailed stamp from your photos. The stamp has such fine detailing you will find it hard to tell the difference when placed next to the original photo, no matter what kind of paper it is printed on.


Required material

  • laser rubber
  • stamp, we used Trodat Professional 5215

Trotec laser used

  • Speedy 100
  • 60 watts


  • Use a 1.5 inch or a 2.0 inch lens.

Step by Step

Step 1: Choose your photo

If possible, use a high-contrast portrait photo with a light, even background. If you want to use pictures from Internet, always download large-scale images.

Find here a detailed guide how to prepare a photo for stamp engraving.

Step 2: Engrave and cut the laser rubber

Open the file "Photo stamp" (Download) and send it to the laser with the recommended laser parameters. The parameters might vary depending on the machine being used and the available laser power.

Recommended engraving parameters (black):

Power 100 %, Speed 18 %, 600 ppi

Recommended cutting parameters (red):

Power 100 %, Speed 2,5 %, frequency 2000 Hz  

Step 3: Assembling of stamp and text plate

As soon as the rubber sheet is engraved and cut, you can assemble the two parts.

See our lasers in action! Request a demo now
Request a demo now