Laser type:	CO₂, Flexx or Fiber laser
Work area:	610 x 305 up to 1016 x 610 mm
Max. workpiece height:	125 - 305 mm
Laser power:	20 - 120 watts

Laser type:	CO₂ laser
Work area:	1245 x 710 up to 3250 x 3210 mm
Max. workpiece height:	50 - 112 mm
Laser power:	40 - 400 watts

Laser type:	CO₂ or Fiber laser
Max. work area:	190 x 190 up to 1300 x 450 mm
Max. workpiece height:	250 - 764 mm
Laser power:	20 - 100 watts / 20 + 100 watts MOPA

Felt & Leather
Christmas Boot

Step By Step Instructions

The sky is your only limit with Trotec laser machines - especially in the lead-up to the festive season! Surprise your loved ones with a beautiful, laser cut Christmas boot made from leather and felt! You can even fill it up with treats and goodies on Christmas night!

Preparation

You Will Need:

Red polyester felt, approx. 4mm
White Alcantara leather
Green wool, approx. 2mm thick

Machine Used:

Speedy 300
60 watts
2" lens

Tips:

We would suggest using 100% polyester felt, as it is optimally suited for processing with laser technology.

Step by Step

laser engraving felt — Step 1: Felt is laser cut and engraved

Step 1:

Open the 'Christmas Boot' file and send it to your laser machine. Please note that the boot is made from two different kinds of material: felt and leather. We will begin by engraving and cutting the boot as follows:

Engraving (black) - Power: 20 %, speed: 50 %, resolution: 500ppi
Cutting (red) - Power: 65 %, speed: 3 %, resolution: 1000 Hz

Also note that laser parameters may vary depending on what machine you are using, as well as it's available laser power.