Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Step by step guide
First impressions count! Make people remember your name with a personalised business card box. Engrave your company logo, your name or your motto with a Trotec laser.
Open the template file (to download click here) and send it to the laser. The laser parameters may vary, as they depend on the machine being used and the available laser power.
Red: power 80 %, speed 0.60 %, frequency 5000 Hz, Air Assist on
Page 1 is the engraving for the outer surface of the box, page 2 shows the calendar and page 3 contains the jig.
Use the jig for a better positioning you start with the engraving.
Black: power 30 %, speed 30%, frequency 1000 ppi, Air Assist on