Speedy series: Laser engraving and cutting machines for formats up to 1016 x 610 mm
⚫ Engrave | ⚫ Cut | ⚫ Mark |
Laser type: | CO₂, Flexx or Fiber laser |
---|---|
Work area: | 610 x 305 up to 1016 x 610 mm |
Max. workpiece height: | 125 - 305 mm |
Laser power: | 20 - 120 watts |
SP series: CO2 laser cutter for large-format materials.
⚫ Engrave | ⚫ Cut | ⎯ Mark |
Laser type: | CO₂ laser |
---|---|
Work area: | 1245 x 710 up to 3250 x 3210 mm |
Max. workpiece height: | 50 - 112 mm |
Laser power: | 40 - 400 watts |
Marking laser stations with galvo marking heads. Marking area up to 44.1 x 25.0 inch.
⚫ Engrave | ⎯ Cut | ⚫ Mark |
Laser type: | CO₂ or Fiber laser |
---|---|
Max. work area: | 190 x 190 up to 1300 x 450 mm |
Max. workpiece height: | 250 - 764 mm |
Laser power: | 20 - 100 watts / 20 + 100 watts MOPA |
Efficient from the design to the cut workpiece: Seamless integration into your data workflow
RIP and CAD compatibility make it possible to seamlessly integrate a Trotec laser cutter into your workflow. Thanks to the fully automated PDF and DXF interface Trotec UniDrive, data can be sent to the laser cutter from the prepress, or work can be prepared via monitored folders, called “Hot Folders." Time-intensive preparation or parametrization of the cutting data is not required.
The “Hot Folders” are provided with all the relevant information, for example, the laser parameters, the position of the job on the work table or the grid resolution. As soon as files are exported from the RIP and stored in the corresponding “Hot Folders”, these appear in the job queue of the JobControl® laser software and are released for processing by the operator. For a precise cut in Print&Cut applications, the camera-supported JobControl® Vision system completes the optimal workflow.
Another highlight: for production planning, the processing times can be very precisely calculated in advance. The pre-calculation of the cutting and engraving times allows efficient production planning for maximum utilization of the laser cutter and can be used for precise quotations.
Maximum compatibility with all RIP systems, graphics or CAD programs is guaranteed. This ensures an efficient data workflow without operator interaction.