Speedy-serien: CO2-lasergraverer og -skærere af formater op til 1016 x 610 mm
⚫ Graver | ⚫ Skær | ⚫ Mærk |
Lasertype: | CO₂, Flexx eller Fiber laser |
---|---|
Arbejdsområde: | 610 x 305 op til 1016 x 610 mm |
Arbejdsemnets maks. højde: | 125 - 305 mm |
Lasereffekt: | 20 - 120 watt |
SP-serien: CO2-laserskærer til materialer i stort format.
⚫ Graver | ⚫ Skær | ⎯ Mærk |
Lasertype: | CO₂ laser |
---|---|
Arbejdsområde: | 1245 x 710 op til 2210 x 3210 mm |
Arbejdsemnets maks. højde: | 50 - 112 mm |
Lasereffekt: | 40 - 400 watt |
SpeedMarker-serien: Industriel high-speed lasermærkning til mærkning af metaller og plast.
⚫ Graver | ⎯ Skær | ⚫ Mærk |
Lasertype: | CO₂ eller Fiber laser |
---|---|
Maks. arbejdsområde: | 190 x 190 op til 1300 x 450 mm |
Arbejdsemnets maks. højde: | 250 - 764 mm |
Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
Use our TroLase Metallic material to make an individual money gift.
Engraving materials are available at Trotec. Browse our product range at: www.trotec-materials.com
For this sample you can use any laser machine from the Speedy series.
Import our design into your graphic program. Personalise it according to your preferences and send it to your laser as a photo.
Process mode | Resolution | Cut line |
---|---|---|
Photo | 500 dpi | none |
Halftone | Others |
---|---|
Ordered Dithering | - |
Put the material into the laser machine. Make sure that it lies flat on the table. Fix the sheet on the table with paper tape if necessary.
Color | Process | Power (%) | Speed (%) | ppi/Hz |
---|---|---|---|---|
black | engrave CO2 | 50 | 80 | 500 |
red | cut CO2 | 60 | 1.2 | 5000 |
Passes | Air Assist | Z-Offset | Advanced |
---|---|---|---|
1 | on | +1 mm | High quality |
1 | on | - | - |
Pull the decorative band through the two laser-cut holes and put the engraved sign into the frame. Now fix the bank notes on the band. To finish this sample, decorate the frame as you like.