Oplev vores lasere i aktion!
Lasergraverer og laserskærer
Speedy-serien: CO2-lasergraverer og -skærere af formater op til 1016 x 610 mm
| ⚫ Graver | ⚫ Skær | ⚫ Mærk |
| Lasertype: | CO₂, Fiber eller Flexx laser |
|---|---|
| Arbejdsområde: | 610 x 305 op til 1016 x 610 mm |
| Arbejdsemnets maks. højde: | 125 - 305 mm |
| Lasereffekt: | 10 - 120 watt |
Laserskæringsmaskine i stort format
SP-serien: CO2-laserskærer til materialer i stort format.
| ⚫ Graver | ⚫ Skær | ⎯ Mærk |
| Lasertype: | CO₂ laser |
|---|---|
| Arbejdsområde: | 1245 x 710 op til 2210 x 3210 mm |
| Arbejdsemnets maks. højde: | 50 - 112 mm |
| Lasereffekt: | 40 - 400 watt |
Industriel mærkningslaser
SpeedMarker-serien: Industriel high-speed lasermærkning til mærkning af metaller og plast.
| ⚫ Graver | ⎯ Skær | ⚫ Mærk |
| Lasertype: | CO₂ eller Fiber laser |
|---|---|
| Maks. arbejdsområde: | 190 x 190 op til 1300 x 450 mm |
| Arbejdsemnets maks. højde: | 250 - 764 mm |
| Lasereffekt: | 20 - 100 watt / 20 + 100 watt MOPA |
Ideal for new laser operators, this quick guide shows you how to get started with the SpeedMarker marking laser. You will learn all the laser basics, starting with the commissioning, and get answers to important questions such as: Where is the laser rack? Where do you switch on the laser and the associated industrial PC? What is the function of the buttons on the laser?
SpeedMark marking software - it's that easy to control the laser
The marking lasers from the SpeedMarker series are operated using the provided, pre-installed SpeedMark marking software. With this software, you can meet any marking requirement, including text, serial numbers, logos, codes (with both static and dynamic content). To perform a simple marking task, follow these steps:
- Open SpeedMark, insert text
- Focus laser (move axes)
- Define laser parameters
- Position component
- Start marking job
And you have successfully marked the component. Within a very short time, you can use the intuitive software and perform your marking tasks.
Helpful guide in operation
This tutorial is a very helpful guide for companies with multiple, changing operators -- enabling employees who only occasionally work with the laser, as well as newly employed personnel, to operate the marking laser within a very short time. This saves time and money and increases the productivity of your company.