Both a CO2- and fiber laser are integrated into the Speedy 300 flexx. Choose a CO2 Laser with 30 or 60 Watt laser power and combine it as you like: with a 10, 20, 30 or 50 Watt fiber laser.
Use both laser sources in a single job without the need to manually change laser tubes, lenses or focus. The revolutionary Speedy 300 flexx takes advantage of the patented JobControl laser software: Assign fiber or CO2 source via color mapping – simple and easy to use. Even metal and wood or pastics and leather can be processed in only one run with the unique “flexx function”. Select your color, assign laser tube and run!
Two materials, one process step: With the Flexx-Function time saving is ensured. For example leather and metal can be processed in one step: With the CO2 laser source leather is engraved, with the fiber laser metal can be marked. Workpieces with mixxed materials can be marked and engraved easily.
A red laser pointer indicates the location at which the laser beam will contact the material. You can minimize the risk of faulty engraving by precise positioning of the job before the engraving begins!
Supports you perfectly in handling your engraving jobs. JobControl® lets you utilize your computer’s performance allowing access to the many useful and intelligent functions that make your work easier.
The Speedy 300 flexx offers 3 different variants for optimal focusing on the material: manual focus with focus gauge, electro-optical with photo-electric guards or via Software. Maximum convenience for the operator through correct focusing of the laser beam on the surface of the workpiece.
Use the Flexx lens for finest detail engravings with maximum quality.
The working platform of the Seedy 300 flexx is ferromagnetically
treated. This means that it is easy to mount thin materials like paper or films using magnetic retention.
Connects a PC to your Speedy 300 flexx. This gives you full control of many laser functions at all times. You can start any engraving job without leaving your workplace.
Trotec exhaust system owners can automatically control this system via JobControl®. For example, you can initiate the exhaust power before the start of engraving or after the end of engraving to optimize the removal of dust or fumes. You also get dynamic feedback on turbine activity and filter saturation.
Working area (28.5" x 17") 726 x 432 mm
Machine dimensions (44.5" x 35.1" x 41.8") 1130 x 890 x 1060 mm
Material size (29.5" x 17.3") 750 x 440 mm
Laser power 10, 20, 30, 50W Fiber laser and 30, 60W CO2 laser
Speed up to 355 cm/sec (139 inch/sec)