English > Products > Galvo Laser Systems > Baseframe Workstation addons 

Baseframe Workstation - Addons/Software 

 

  • Rotary Indexing Table 

    Rotary Indexing table for simultaneous loading and marking, can cut production time in half.
     

  • Rotating Partition Wall 

    Rotating partition wall on the rotary table replaces the lift door for even shorter cycle times. Included is an additional side window and a side door.
     

  • Programmable X-Y Axes 

    Programmable X-Y Axes to allow batch processing or addressing larger parts. The Speedmarker software controls the axis motion and even stores the positional information when the program is shutdown.
     

  • Software-initiated Z-axis 

    Software-initiated Z-axis with 400mm (15.7") of travel, to enable the system to process parts of varying heights
     

  • Foot Switch 

    Foot Switch for hands-free operation
     

  • Handheld Barcode Reader 

    Interface with a hand held barcode reader. This allows marking data to be entered without the need of the keyboard. Order data, part information, etc., can be directly scanned from the order sheet.