Heat transfer film
cut with a laser

Step by step guide

laser engraved t-shirt

Decorate apparel and textiles with your favorite designs, logos and lettering using heat transfer film and your Trotec laser. Download our template and follow our step-by-step instructions below.

Preparation

Required material
  • Heat transfer film
  • T-Shirt
  • heat press
Used Trotec Laser
Heat Transfer Film

ZIP

Download now
csm_textile-heat-transfer-film_3312cdd085.png

PDF

Download now

Step by step

Step 1

Step 1: Engrave and cut the heat transfer materia

You can use our template, download and modify it, or use your own original design. Send your design to the laser with the recommended laser parameters. The parameters might vary depending on the machine used and the available laser power.

Recommended parameters:

Engraving: Power: 50 %, Speed: 50 %, Resolution: 500 dpi, air assist on
Cutting: Power: 12 %, Speed 1 %, Frequency 1000 Hz, air assist on

Step 2

Step 2: Finish your textile application

Use a heat press for transferring the heat transfer film on textiles. Transfer the film for 17 seconds at 329°F. Remove the liner when the material is completely cold. 

Speedy series
The ideal laser engraver and cutter for personalization.

Discover laser engravers and cutters

Questions about applications or settings?
We're happy to advise you from A for Air assist to Z for z-offset.

Contact us
Proud member of troGROUP Logo