Felt Table
Decorations
Get in the mood for spring by decorating your table with laser cut butterfly napkin rings and flower cutlery bags! With these cheery table top decorations the spring mood will stay in your home... Even during rainy days!
![laser cut table decoration](/static_processed/6464652a861bf9ee0667bc2b1081ab69/.JPG?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/table-decoration/table-decoration-felt.JPG","edits":{"resize":{"width":1280,"height":640,"fit":"cover"}}})
Preparation
Required material
4 mm polyester felt in two colors
Used Trotec Laser
- Speedy 400
- 40 watts
- 2 inch lens
![](/static_processed/4f97f062b55b464e7306fe4e8e32124c/.pdf?{"image":"https://backend.troteclaser.com/static/_processed_/0/6/csm_Spring_fc0ffb8732.png","edits":{"resize":{"width":630,"fit":"cover"}}})
![](/static_processed/12b3e7769269cbd65367a535dce90bfa/.pdf?{"image":"https://backend.troteclaser.com/static/_processed_/0/6/csm_textile-felt-deco_90f838fcbf.png","edits":{"resize":{"width":630,"fit":"cover"}}})
Step by step
![laser cut table decoration](/static_processed/c960deb85712fc37745d8b69711e3395/.JPG?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/table-decoration/table-decoration-felt.JPG","edits":{"resize":{"width":650,"fit":"cover"}}} "table-decoration-felt.JPG")
Step 1
Step 1:
Open the file "Spring" in your favorite graphics program and send it to the laser. Laser parameters may vary depending on the machine used and the laser power available... The seetings below are for a 40W Trotec laser system.
Black Lines (engraving)
Power: 60 %, Speed: 50 %, Resolution: 500 dpi, air assist on
Red Lines (cutting):
Power: 60 %, Speed 1.1 %, Frequency 1000 Hz, air assist on, correction 20
![felt laser cutting](/static_processed/0bc6890e2d275d36b5f6c02a024dde78/.JPG?{"image":"https://backend.troteclaser.com/static/images/knowledge/diy-samples/table-decoration/lasermade-felt-spring-decoration.JPG","edits":{"resize":{"width":650,"fit":"cover"}}} "lasermade-felt-spring-decoration.JPG")
Step 2
Step 2:
Assemble the parts. The table decoration is designed to fit perfectly without adhesive.
Step 3
Tips:
- Use a 2 inch lens.
- We suggest to use polyester felt for clean cutting edges and great engraving results.
- Using a honeycomb table prevents the felt rub off on the processing table.
![](/static_processed/666fff4d72dd3cc08ac610849af36edf/laser-engraver-speedy-400-left.png?{"image":"https://backend.troteclaser.com/static/images/Laser_Machines/Speedy_Series/laser-engraver-speedy-400-left.png","edits":{"extract":{"top":142,"left":497,"width":933,"height":393},"resize":{"width":650,"fit":"cover"}}})
![](/static_processed/e13c93d5f34c84a898cdaaf75a5e9905/contact-ferdinand.jpg?{"image":"https://backend.troteclaser.com/static/images/contact/contact-ferdinand.jpg","edits":{"resize":{"width":194,"height":194,"fit":"cover"}}})
